Name : Moris Diamond Tester Machine || High Accuracy Diamond Tester Tool || Portable Diamond Selector With 9V Lithium Ion Battery || Gem Or Stone Tester Tool (Black)

Net Quantity (N) : 1

How To Test Diamond

• Turn on the switch,Make sure only 1 light is lighting up on the scale.

• Wait few seconds for the probe to heat up until Lamp on ready OK.

• Turn on the lights numbers corresponding to the indoor temperature and diamond weight.

• If don't know. Set 4 lights is lighting up on the scale.

• Start test diamond, no need to adjust the switch switch.Use the diamond discriminator probe to make 90-degree contact with the measured object, and observe the indicator light change.

• It needs a little bit of force to stop it on the diamond surface and make full contact.If unsuccessful, please repeat the second step.

Step 1?

Put the 9V battery in. (not included).

Take off the probe cap.

Step 2?

Turn on the switch, the power indicator is on.

Wait few seconds for the probe to heat up until another indicator is lighting up.

Step 3?

If you test diamond, you then need to turn on the number of lights corresponding to the indoor temperature and diamond weight.

Step 4?

If you test other gems, you'd better calibrate the probe before testing, Method : by placing the probe vertically on a piece of glass, then adjusting the light to 5, and then placing the probe on the gemstone to test.

Country of Origin : India